GeneDireX UltraScence Femto Western Substrate/ HRP 酵素冷光試劑
GeneDireX UltraScence Femto Western Substrate/ HRP 酵素冷光試劑
產品編號F054
Catalog Number Unit Size Reactions
CCH365-B100ML 50ml x 2
CCH365-004ML 2 ml x 2
Description

The UltraScence Femto Western Substrate, as a luminol-based enhanced
chemiluminescent substrate, is sensitive and compatible with conducting immunoblots
with horseradish peroxidase (HRP) – conjugated secondary antibodies.
The mid femtogram to low femtogram detection of antigen is enabled by
UltraScence Femto Western Substrate’s excellent sensitivity and long signal duration.
Further, its long chemiluminescent signal duration makes both digital and film-based
imaging possible without any loss of the signal. Appropriate primary and secondary
antibody dilutions are suggested for attaining optimal signal intensity and duration.

Feature
- No optimization required.
Switching to theUltraScence Femto Western Substrate from other brands, such as Thermo Scientific™ SuperSignal™ West Femto and Wako™ ImmunoStar™ LD, does not require optimization or protocol changes.
- High degree of sensitivity and enhanced chemiluminescence duration.
UltraScence Femto Western Substrate enables an accurate mid picogram to low femtogram detection of protein on the same immunoblot after a single exposure.
- Optimized for use with PVDF and nitrocellulose membranes.
- Compatible with Western Blotting Markers.
- Optimized for film- and CCD-based imaging.
- Patent pending product.

Chemiluminescent Development
1. Keep the membrane moist in the wash buffer while preparing the substrate mixture. Make sure the membrane does not dry out in the next steps.
2. The chemiluminescent substrate solution is sufficiently stirred to prepare the 0.1ml of solution / cm2 of the membrane.
- For a small membrane (7 x 8.5 cm), 4 ml of solution is sufficient.
- For a medium-sized membrane (8.5 x 135 cm), 10 ml of solution is sufficient.
3. Place the membrane on a clean, flat surface or in a clean container.
4. Remove the membrane from the chemiluminescent substrate solution and drain the excess solution.
5. Place the membrane in a plastic sheet protector or plastic wrap to prevent the film from drying out.
6. Imaging the membrane with a digital imager or by exposure to the X-ray film.
Performance

Membranes were probed with Rabbit anti β-actin antibody (GTX109639) diluted at 1:5,000
of and then with Goat anti Rabbit HRP-conjugated secondary antibody (GTX213110-01, 1:10,000)
after serial dilution mock RD cell lysates were prepared and applied in electrophoresis and protein
transfer. Identical blots were incubated with 400 μL of UltraScence Pico Ultra Western substrate
(CCH345) and UltraScenceFemto Ultra Western substrate (CCH365). The blots were
simultaneously exposed for 10 seconds, 30 seconds and 60 seconds a using Chemlux SPX-600
Series digital imaging system.
* ImmunoStar™ LD is a registered trademark of FUJIFILM™ Wako™ Pure Chemical
Corporation and Trident™ femto Western HRP Substrate is a registered trademark of GeneTex™
. The trademark holder is not affiliated with Bio-HeliX Co., Ltd. and does not endorse these products.

ELIZA Application
UltraScence WB substrates can also be applied as ELISA substrates.


Table of Correspondence

產品訂購資訊
Product Name: UltraScence Femto Western Substrate
Product Item No.: CCH365-B100ML
Dimensions: 100ML
Substrate Type: HRP (Horseradish Peroxidase) Substrate
Contents/Storage: Store at 4℃ for 1 year
相關下載
1. GeneDireX_CCH365-B100ML_Protocol
2. GeneDireX UltraScence Western Substrate Series – Solution A_SDS
3. GeneDireX UltraScence Western Substrate Series – Solution B_SDS
萬柏科儀有限公司/666儀器網
電話:(06)635-0686
電子信箱: sales@cae.url.tw